Dish Cove
0
Dishwashers

Before you choose

Compare the details that matter, then check the full product page.

Cove Six Countertop Dishwasher →

Needs a level counter, ventilation clearance and a suitable drain connection. Maximum plate diameter 25 cm.

Disconnect power and shut off water before maintenance. Clean the filter regularly; use dishwasher detergent only. Installation should follow the supplied guide and local requirements.

Cove Eight Compact Dishwasher →

Freestanding use; allow room ahead for the open door. Maximum plate diameter 26 cm.

Disconnect power and shut off water before maintenance. Clean the filter regularly; use dishwasher detergent only. Installation should follow the supplied guide and local requirements.

Cove Slim 45 Dishwasher →

Measure the full opening and allow rear hose clearance; leveling feet provide 1 cm adjustment.

Disconnect power and shut off water before maintenance. Clean the filter regularly; use dishwasher detergent only. Installation should follow the supplied guide and local requirements.

Cove Full 60 Dishwasher →

Allow rear hose clearance and space for the door to lie fully open. Maximum lower-rack plate diameter 29 cm.

Disconnect power and shut off water before maintenance. Clean the filter regularly; use dishwasher detergent only. Installation should follow the supplied guide and local requirements.

Cove Integrated 60 Dishwasher →

Fits a measured minimum W60 × D57 × H82 cm bay; decorative front panel is not included.

Disconnect power and shut off water before maintenance. Clean the filter regularly; use dishwasher detergent only. Installation should follow the supplied guide and local requirements.

Cove Full Cutlery Basket →

Slots into the designated lower-rack position of Cove Full DC60 only.

Rinse after use; clear food debris from slots.

Cove Six Inlet Hose →

Use only with the DC6 inlet and a compatible threaded cold-water outlet; avoid kinks.

Shut off water before fitting; check washers and inspect connections for leaks.

Cove Integrated Panel Fixing Kit →

Use the DCI60 drilling template and permitted panel thickness of 16–20 mm. Panel is supplied separately.

Disconnect power before work. Fit according to the DCI60 guide; check clearance before opening.

Your bag 0

Saved for later

Your favorites stay in this browser.